Curvature investigation in tapered fibers and its application to sensing and mode conversion

Non-adiabatic tapered fibers are basic photonic components used in a wide range of applications. Here we investigate a way to increase their utility through the controllable bending of one of their tapered sections. The experiments carried out explain, for the first time, the mechanics of this approach showing how these tapers can be used to build more sensitive sensors. Their use as highly efficient mode converters is also discussed.     

Shear-induced nonisothermal crystallization of two grades of PLA

Shear-induced nonisothermal crystallization of two commercial polylactides (PLAs) differing in optical purity was studied. The molten polymers were sheared at selected temperatures (T_s) and subsequently cooled. The crystallization was followed by a light depolarization method, whereas the specimens were analysed ex-situ by DSC, 2D-WAXS and SEM after etching. It was found that the effect of shear, especially on the crystallinity developed during post-shearing cooling, intensified with a decrease of T_s from 160 to 146 ^°C, and with increasing shear rate and strain. Moreover, the effect of shear on PLA1.5 with d-lactide content of 1.5% was stronger than PLA2.8 with 2.8% of d-lactide, although maximum crystallinity of both polymers was practically the same. A decrease of cooling rate from 30 to 10 ^°C/min increased crystallinity of both PLAs, except for those shearing conditions which induced high crystallinity even during faster cooling. Although SEM examination revealed some row-nucleated forms, no significant crystal orientation was detected by 2D-WAXS, indicating that, under the experimental conditions, the shear induced predominantly point-like nuclei.     

Magnetic behaviors and multitransition temperatures in a nanoisland

A nanoisland consists of center spin-5/2 and perimeter spin-3/2 atoms, which is described by transverse Ising model with single-ion anisotropy. Magnetic behaviors of the nanoisland are studied by the effective-field theory with correlations and the differential operator technique. The formulas of the magnetization and the phase transition of the system are given. The numerical results of the phase transition, the magnetization, the initial susceptibility and the internal energy have been discussed. Some interesting phenomena, such as a new reentrant, are found. Namely there are multitransition temperatures dependent on competition among the single-ion anisotropies, the transverse field and the interlayer coupling. These results can provide some guidance to structure design in the nanoislands.     

Morphology and properties of super-toughened bio-based poly(lactic acid)/poly(ethylene-co-vinyl acetate) blends by peroxide-induced dynamic vulcanization and interfacial compatibilization

Super-toughened poly(lactic acid) (PLA)/poly(ethylene-co-vinyl acetate) (EVA) blends were prepared via 2,5-dimethyl-2,5-di(tert-butylperoxy)hexane (AD) induced dynamic vulcanization and in situ interfacial compatibilization. The effects of AD on the morphology and properties of PLA/EVA blends were studied using a Brabender torque rheometer, gel content test, scanning electron microscopy (SEM), differential scanning calorimetry (DSC) thermogravimetric analysis (TGA) and mechanical properties test. The torque and gel content demonstrated that EVA and PLA was successfully vulcanized in the presence of free radicals obtained by the decomposition of the 2,5-dimethyl-2,5-di(tert-butylperoxy)hexane (AD). Additionally, the gel content results indicated that, compared with PLA, EVA is more aggressive with free radicals. The SEM revealed that a relatively uniform phase morphology and good interfacial compatibilization were achieved in the dynamically vulcanized PLA/EVA/AD blends. The interfacial reaction and compatibilization between the component polymers resulted in the formation of super-toughened PLA/EVA blended materials.     

Molecular dynamics simulation of DNA‐directed assembly of nanoparticle superlattices using patterned templates

DNA‐directed assembly is a well developed approach in constructing desired nano‐architectures. On the other hand, E‐beam lithography is widely utilized for high resolution nano‐scale patterning. Recently, a new technique combining these two methods was developed to epitaxially grow DNA‐mediated nanoparticle superlattices on patterned substrates. However, defects are observed in epitaxial layers which restricts this technique from building large‐scale superlattices for real applications. Here we use molecular dynamics simulations to study and predict defect formation on adsorbed superlattice monolayers. We demonstrate that this epitaxial growth is energetically driven by maximizing DNA hybridization between the epitaxial layer and the substrate and that the shape anisotropy of the DNA‐mediated template posts leads to structural defects. We also develop design rules to dramatically reduce defects on epitaxial layers. Ultimately, with the assist of the computational study, this technique will open the door to constructing well‐ordered, three‐dimensional novel nanomaterials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1687–1692     

Preparation of magnetic Fe3O4/TiO2/Ag composite microspheres with enhanced photocatalytic activity

The novel three-component Fe₃O₄/TiO₂/Ag composite mircospheres were prepared via a facile chemical deposition route. The Fe₃O₄/TiO₂ mircospheres were first prepared by the solvothermal method, and then Ag nanoparticles were anchored onto the out-layer of TiO₂ by the tyrosine-reduced method. The as-prepared magnetic Fe₃O₄/TiO₂/Ag composite mircospheres were applied as photocatalysis for the photocatalytic degradation of methylene blue. The results indicate that the photocatalytic activity of Fe₃O₄/TiO₂/Ag composite microspheres is superior to that of Fe₃O₄/TiO₂ due to the dual effects of the enhanced light absorption and reduction of photoelectron–hole pair recombination in TiO₂ with the introduction of Ag NPs. Moreover, these magnetic Fe₃O₄/TiO₂/Ag composite microspheres can be completely removed from the dispersion with the help of magnetic separation and reused with little or no loss of catalytic activity.     

Highly Efficient Dehydrogenative Coupling of Hydrosilanes with Amines or Amides Using Supported Gold Nanoparticles

Hydroxyapatite‐supported gold nanoparticles (Au/HAP) can act as a highly active and reusable catalyst for the coupling of hydrosilanes with amines under mild conditions. Various silylamines can be selectively obtained from diverse combinations of equimolar amounts of hydrosilanes with amines including less reactive bulky hydrosilanes. This study also highlights the applicability of Au/HAP to the selective synthesis of silylamides through the coupling of hydrosilanes with amides, demonstrating the first example of an efficient heterogeneous catalyst. Moreover, Au/HAP shows high reusability and applicability for gram‐scale synthesis.     

On Copper(I) Fluorides,the Cuprophilic Interaction,the Preparation of Copper Nitride at Room Temperature,and the Formation Mechanism at Elevated Temperatures

Our attempts to synthesize the hitherto unknown binary copper(I) fluoride have led to first successes and a serendipitious result: By conproportionation of elemental copper and copper(II) fluoride in anhydrous liquid ammonia, two copper(I) fluorides were obtained as simple NH₃ complexes. One of them presents an example of ligand‐unsupported “cuprophilic” interactions in an infinite [Cu₂(NH₃)₄]²⁺ chain with alternating Cu–Cu distances. We discovered that both copper(I) fluorides can easily be converted into Cu₃N at room temperature, just by applying a vacuum. Additionally, we investigated the formation mechanism of the classical synthesis route of Cu₃N that starts with CuF₂ and flowing NH₃ in the temperature range between ambient and 290 °C by means of thermal analysis and in situ neutron diffraction. The reaction proceeds at elevated temperatures through the formation of a blue and amorphous ammoniate Cu(NH₃)₂F₂, the reformation of CuF₂, and finally the redox reaction to form Cu₃N.